BH93420 III Water level Transmitter Introduction of water level transmitter: BH93420-III Piezoresistive water level transmitter adopts the piezoresistive sensor principle to determine the liquid level height by measuring the pressure effect of the medium on the sensor. When the liquid height increases, the pressure of the medium on the sensor increases, resulting in a change in the resistance value of the sensor. The piezoresistive liquid level transmitter converts it into an electrical signal output related to the liquid level height by measuring the change in the resistance value of the sensor. The transmitter can accurately calculate the liquid level height according to the linear relationship between pressure and resistance. Product Features: - Split-type design, facilitating on-site wiring and calibration
- LED display
- Explosion-proof rating : ExiaIICT6
- High protection : IP68
- Cable : PE,PU.PTFE
Applications:
1. widely used in the level monitoring and control of storage tanks, tank cabinets, pipelines and other containers.
2. It can be used in liquid storage and transportation systems in petroleum, chemical, pharmaceutical and other industries to ensure that the liquid level is within a safe range.
3. Piezoresistance liquid level transmitter can be used in water treatment equipment to monitor the liquid level of water tanks, pools, etc., to achieve automatic control.
4. It is suitable for canning, filling and other processes in the food processing industry to ensure that the liquid level of the product meets the standard.
5. Piezoresistive level transmitter can be used for environmental monitoring, such as the level monitoring of rivers, lakes and other water bodies.
6. It can be used in ships and offshore engineering to monitor the liquid level of ship fuel tanks, cabins, etc.
| Performance Parameters: |
| Measurement Range | 0~10m…400mH2O |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 2X rated range |
| Accuracy @ 25ºC | ±0.25% (Typ.) ±0.5% (Max.) |
| Repeatability | ±0.03% (Typ.) ±0.05%FS (Max.) |
| Hysteresis | ±0.03% (Typ.) ±0.05%FS (Max.) |
| Long-Term Stability | ±0.15%F.S/year (Max.) |
| Zero Temperature Drift | ±0.01%FS/ºC(>100KPa), ±0.02%FS/ºC (≤100Kpa) |
| Span Temperature Drift | ±0.01%FS/ºC(>100KPa), ±0.02%FS/ºC (≤100Kpa) |
| Compensation Temperature | 0-50ºC (0-1m . 0-2m); 0-70ºC |
| Operating Temperature | -20~80ºC |
| Storage Temperature | -30~100ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Shock | 100g |
| Housing Material | Cast aluminum, l1Cr18Ni9Ti |
| Diaphragm Material | 316L Stainless Steel |
| Insulation Resistance | >=100MΩ@100VDC |
| Explosion-proof Rating | ExiaIICT6 |
| Protection Rating | IP68 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~1.5Kg (without cable) |
| Cable Material | Polyethylene, Polyurethane, PTFE cable |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 15~30VDC | 2/3/4 wire |
| RS485 Communication Protocol | | 4 wire |
1. Please ensure that the measured medium is compatible with the product components in contact with it during selection.
2. The density of the measured medium should be specified.
3. For strong electromagnetic or radio frequency interference, please provide details to our company and indicate it in the order.
4. To ensure the reliable operation of the product, it is recommended that users install lightning protection devices on-site and ensure the product and power supply are reliably grounded. | Order Guide: |
| BH93420 | Code | Outline Construction |
| | III | Liquid level transmitter with the 2088 housing |
| | | Measurement Range | 0~10m…400m |
| | | | Code | Power Supply |
| | | | D1 | 24VDC |
| | | | | Code | Output Signal |
| | | | | S1 | 4~20mADC | S2 | RS485 |
| | | | | | Code | Electrical Connection |
| | | | | | B5 | 2088 with display |
| | | | | | B6 | 3051A |
| | | | | | | Code | Pressure Type |
| | | | | | | G | Gauge Pressure |
| | | | | | | A | Absolute Pressure |
| | | | | | | S | Sealed Reference Pressure |
| | | | | | | | Code | Material |
| | | | | | | | 01 | 304 Stainless Steel |
| | | | | | | | 02 | 316L Stainless Steel |
| | | | | | | | | Code | Cable Material |
| | | | | | | | | C1 | PE |
| | | | | | | | | C2 | PU |
| | | | | | | | | C3 | PTFE |
FAQ:
1. Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance. Customization available.
2. Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service
3. Q: What is your production capacity?
A: Our manufacturing facilities can produce up to 30,000 pressure sensor transmitters per month, so we are fully capable of meeting the needs of large-scale orders. However, it is advisable to contact our sales team in advance to ensure smooth production and delivery scheduling.
4. Q: What's the typical delivery period?
A: 5~8 working day for standard models. Customized products may vary.
5. Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term partners.
6. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 24 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available. 
